Tormach 1100M CNC Mill Review [2023]-For Prototyping

1100M is a compact, versatile, and well-engineered CNC mill developed for prototyping and light production.

Tormach launched the 1100M CNC mill in August 2020.

With sturdy construction and a heavy-duty spindle, 1100M is a feature-rich CNC mill that can handle any material thrown at it including titanium.

Tormach offers the 1100M CNC mill in four packages, entry, starter, standard, and premium packages.

The following feature table can give you a summary of the Tormach 1100M mill packages:


FeatureEntryStarterStandardPremium
CNC Mill✓✓✓✓
Stand and controller arm✓✓✓
Enclosure✓✓
Backsplash✓
Touch screen monitor✓
ATC✓
FogBuster coolant system✓
DuraKut 9000B Mist Coolant✓
Tormach passive probe✓
CNC vise✓✓✓
Endmill kit for steel✓

Quick overview of Tormach 1100M CNC mill packages

Tormach 1100M CNC mill review

For this review, I choose various parameters to evaluate Tormach 1100M CNC mill like size, build quality, material capability, spindle, controller and electronics, upgrades, accessories, community, and support.

1. Size

The Tormach 1100M has a 69″ × 56.5″ footprint (including the chip tray). You have to keep around 20″ wide passage on all sides to effectively get to the electronics panel, side switches, and coolant tank (on the stand).

If you buy the entry package, you need to provide a solid table that can handle around 500 lbs of weight and is sturdy enough to dampen the vibrations produced during metal machining.

Tormach 1100M CNC mill stand
Tormach 1100M CNC mill stand

Alternatively, you can consider the welded steel stand that Tormach offers. It is made of cast iron and has rigid build quality for heavy-duty CNC machining.

The stand has leveling feet to level it on uneven surfaces. It also has a 12-gallon moveable coolant tank to be used with a flood coolant system.

Tormach 1100M provides you with a cutting area of 18″ × 11″ with a maximum Z-axis travel of 16.25″, which is helpful when using long tools to make deep pockets or drill holes.

2. Chassis

Chassis of Tormach 1100M
Chassis of Tormach 1100M

The base frame and C-column of Tormach 1100M are made of cast iron that provides increased stiffness to achieve precision machining at optimum speeds.

Its cast-iron frame makes Tormach 1100M heavy to provide strength and reduce vibrations in heavy-duty CNC machining.

All packages of Tormach 1100M have a manual oiler with metal braided oil hoses attached to them. The oil hoses are connected to the nut of the ball screw drive to ensure proper lubrication.

The workbed of Tormach 1100M has a metal guard plate at the front to protect the oil hose and limit switch.

It also has an X-axis motor mount to protect the stepper motor from swarfs during metal machining.

Workbed in Tormach 1100M
Workbed in Tormach 1100M

Additionally, the workbed has T-slot channels to let you attach additional hardware like CNC vise, 4th axis kit, and rotary tables.

If you buy the standard or premium package, you get an enclosure for additional safety and cleanliness in your workspace. For the entry and starter package, you need to purchase this separately.

3. Linear Motion

Ball screw and dovetail guide in Tormach 1100M
Ball screw and dovetail guide in Tormach 1100M

Tormach 1100M is a vertical CNC mill; its workbed moves in X and Y axes and the spindle travels in Z-axis. All axes of 1100M use a ball screw drive to achieve linear motion without backlash.

It also provides better positional accuracy and load-carrying capacity than another drive mechanism.

To guide linear motion, it has sliding dovetail grooves that are hand-scraped and designed to resist high loads and reduce vibrations during metal machining.

The grooves have acetylene sliding surfaces filled with PTFE, which has low friction and long service life.

Additionally, the sideways have tapered gibs to produce precise movement for making cuts with reliable accuracy.

Accordion way covers in 1100M
Accordion way covers in 1100M

In Tormach 1100M, accordion way covers are used to seal the ball screw drive of Y and Z axes to protect them from dust.

4. Material capability

The Tormach 1100M is built with professional-grade components and can cut materials like aluminum, plastics, and wood.

Titanium milling in 1100M
Titanium milling in 1100M

With rigid construction and a powerful spindle, it can cut non-ferrous metals like steel and titanium.

Tormach provides PathPilot control software, a tailored software with a built-in calculator to recommend speeds and feeds required for different metal machining.

5. Spindle

Induction motor in Tormach 1100M
Induction motor in Tormach 1100M

The spindle of Tormach 1100M is powered by a 2 hp induction motor that can achieve a maximum speed of 7,500 RPM. The induction motor uses a Poly-V belt for power transmission to the spindle.

NIDEC unidrive M200 AC drive in Tormach 1100M
NIDEC unidrive M200 AC drive in Tormach 1100M

Tormach uses the NIDEC Unidrive M200 AC drive for induction motor control. It enhances up-time and delivers high performance in heavy-duty CNC milling.

The spindle collet comes with an R8 taper to hold the cutting tool and thread, tension, and auto-reversing mill for tapping.

Its induction motor shaft has two pulleys to offer two speed ranges. You can set low RPM to get high torque for cutting metal with high tensile strength, like steel and titanium.

With this powerful spindle, you can get a maximum feed rate of 110 IPM in X and Y axes and up to 90 IPM on the Z-axis.

12 tool pocket ATC Spindle
12 tool pocket ATC Spindle

The premium package of Tormach 1100M has a 12-tool pocket automatic tool changer spindle. It consists of two pneumatic cylinders, which use compressed air to provide linear motion to the 12-station tool tray.

Air compressor for ATC
Air compressor for ATC

You can consider the California Air Tools 4610AC air compressor offered by Tormach to deliver high-pressure compressed air to pneumatic cylinders of ATC. The compressor has a 1 hp motor and a 4.6-gallon twin steel air tank.

The compressor operates quietly with a lifespan of more than 3,000 hours.

You need to provide air pressure between 90 and 120 psi to ATC for its optimum performance. The 4610AC seems suitable here because it can deliver maximum air pressure up to 120 psi.

Spindle speeder
Spindle speeder

You can use a spindle speeder if you want to do post-processing, like engraving and light finishing on workpieces.

The speeder mounts directly to the R8 spindle. It has a mechanical speed multiplier that provides 20,000 RPM for continuous operation, and for short duty cycles, it can provide speed up to 30,000 RPM.

Although you can use the speeder with an ATC spindle, you can not use an auto tool changer due to the aluminum housing of the speeder.

Kress high speed spindle
Kress high speed spindle

Alternatively, you can use a companion spindle for finishing and engraving operations.

Tormach offers Kress, a high-speed spindle. It is a german-made air-cooled spindle with a rated power of around 1 hp and can run on variable speeds from 10,000 to 29,000 RPM.

The high-speed spindle kit ships with a universal spindle arm and plate for verticle mounting.

If you want to work on the end of a long workpiece, you will need to mount the companion spindle horizontally. Tormach also offers a horizontal mount that needs to be attached to the universal spindle arm.

Tormach high-speed spindle
Tormach high-speed spindle

Tormach also offers a 1.5 hp high-speed VFD spindle to cut soft materials, like plastic and aluminum. This spindle has a speed range of 10,000-24,000 RPM.

You need to remove the R8 spindle from the bore to install a high-speed spindle.

Industrial chiller
Industrial chiller

The high-speed spindle is water-cooled, so you need to purchase a water chiller kit separately.

You can consider the industrial chiller offered by Tormach for this purpose. It has a reservoir of 2.4 gallons with a digital display for temperature reading.

You should use water chiller treatment with the chiller unit to protect the chiller system from corrosion. It also has an additive to ensure maximum lubrication in a closed-loop water chiller system.

6. Controller and electronics

Stepper motor

Stepper mototrs in Tormach 1100M
Stepper mototrs in Tormach 1100M

All axes of Tormach 1100M use NEMA 34 stepper motors to drive linear motion components.

The motors have a holding torque of 270 oz-in, enough to move the workbed and heavy-duty spindle or a combination of heavy-duty and companion spindle.

Leadshine stepper driver in Tormach 1100M
Leadshine stepper driver in Tormach 1100M

Tormach uses the Leadshine MA860H stepper drivers for stepper motors in the 1100M CNC mill.

It can provide a maximum output current of 7.2A and has some useful features, like auto idle-current reduction, over-voltage, and over-current protection for enhanced safety.

Limit switch

Limit switch in 1100M
Limit switch in 1100M

All axes of Tormach 1100M are fitted with limit switches to detect extremities and it sets the travel bounds of the workbed and spindle.

Controller

PathPilot controller inside machine stand of Tormach 1100M
PathPilot controller inside machine stand of Tormach 1100M

Tormach provides Gigabyte Brix mini-PC with pre-installed PathPilot controller software for CNC motion control. It is an Intel processor-based control computer with 80 GB of storage to store program files.

You can install this mini-PC inside the machine stand of the 1100M CNC mill.

It has WiFi, USB, and VGA port(to connect the monitor), and ports for keyboard, mouse, and jog shuttle for designing and CNC motion control.

Tormach offers an RJ 45 ethernet cable to connect the control PC to the 1100M CNC mill.

You need to plug the Brix mini-PC into the 115 Vac socket that is available at the side of the electronic panel of the 1100M CNC mill.

Electrical cabinet in Tormach 1100M
Electrical cabinet in Tormach 1100M

The electrical cabinet is installed at the back of the Tormach 1100M CNC mill.

It houses an ECM1v1.4 control board with protection cover, stepper drivers, inverter drive for induction motor control, wire connectors, and main power supply switch.

ECMv1.4 control board in Tormach 1100M
ECMv1.4 control board in Tormach 1100M

You get a wired emergency stop switch connected to the electrical panel. This switch lets you stop the CNC mill in case of an emergency.

If you are facing any trouble with your CNC mill, you can press the reset switch adjacent to the emergency stop button to initialize the machine to its default state.

Emergency stop button
Emergency stop button

The emergency stop switch comes in a metal casing, and you can place it either on the table or mount it to the enclosure to reach effortlessly.

Tormach 1100M requires a 230V single-phase AC supply to operate. All Tormach CNC machines are powered by regular household electricity so that their machines can be used everywhere.

Buck boost transformer
Buck boost transformer

If your locality has a power supply of less than 230V, I recommend you use the buck-boost transformer offered by Tormach.

The buck-boost transformer comes in a NEMA 3R type enclosure with conduit knockouts for easy installation of electrical wires. It is small and you can mount the entire unit on a wall.

Note that it acts as a booster only, not as a power line conditioner that removes spikes and smoothens electric signals.

7. Software

PathPilot Software
PathPilot Software

Tormach provides PathPilot software for CNC motion control. It is a conversational milling software, which lets you create project designs without CAD/CAM software.

Conversational programming is suitable for on-site project designing.

You need to answer prompts for information that is required for designing. While programming, if any parameter is entered incorrectly, PathPilot will spot and display the error in the wink of an eye.

You can also interface PathPilot with CAD/CAM software, like Autodesk and Inkscape. This software also has built-in Dropbox support to transfer design files of any size.

SprutCAM software
SprutCAM software

Additionally, Tormach offers SprutCAM software to use with Tormach 1100M. Its standard license includes a 3-axis toolpath for 3D machining, and an advanced license enables a 4-axis toolpath for rotary milling.

The 3-axis toolpath suite of SprutCAM has various toolpaths, such as face milling, hole machining, corners cleanup, 2D and 3D contour, and waterline.

In addition to the 3-axis toolpath, its advanced version has a toolpath suite for rotary roughing, rotary finishing, and profile machining.

It is a powerful CAD/CAM software and lets you design models of fixtures and parts for machining. You can also import 3D designs from 3rd party resources and change their dimension according to your project requirement.

Considering material stock location and cutting tool movement, SprutCAM provides real-world toolpaths, showing the simulation and final virtual design at the end.

Intermediate milling results are also available to a user on every step to let you correct parameters if required. It is also helpful to estimate the accessibility of the surfaces after milling.

Additionally, SprutCAM considers cutting tool kinematics and stock geometry to generate the toolpath without any parameter setting.

If you want to change this toolpath, you can easily adjust the parameters to get a new toolpath according to your requirement.

Note that SprutCAM software is compatible with Windows-based PCs only.

Tormach also offers PathPilot HUB, which is a cloud-based software and very useful for teachers and remote educators for teaching CNC programming.

Once you are satisfied with design programming and simulation, you need to sync the design files down to run them in Tormach 1100M CNC mill.

PathPilotHUB web interface
PathPilotHUB web interface

Additionally, if you have an offsite shop, PathPilot HUB lets you work on project designs before actually visiting the CNC mill.

Whether you are a hobbyist, an educator, or an entrepreneur, PathPilot HUB is free for all to use.

8. Upgrade

M+ upgrade

Tecnic ClearPath servo motors for M+ upgrade in Tormach 1100M
Tecnic ClearPath servo motors for M+ upgrade in Tormach 1100M

Tormach offers an M+ upgrade to let you take advantage of servo motors’ rapid speeds and quick acceleration.

You can upgrade your 1100M with servo motors to get the high-speed movement of the workbed and spindle to increase production throughput.

To upgrade your 1100M to 1100M+, make sure your PathPilot software is updated to its most recent version so that you can get the M+ configurations for servo motors.

If your control board has ECM1v1.4 or an earlier version, you need to upgrade it with ECM1v1.5 or a later version to get connection ports and the firmware to control servo motors.

Tormach provides Teknic ClearPath servo motors with a Z-axis brake module for the M+ upgrade. The ClearPath motors have an advanced servo system to provide fast rapids to complete operations in a short time.

Teknic servo motors use a proprietary algorithm to limit jerks while motors are in motion. This ensures smooth motion of motors with lesser motor noise than stepper motors.

With this upgrade, you get a maximum feed rate of 300 IPM on X and Y axes and up to 230 IPM on the Z-axis.

Tormach provides good resources that have step-by-step instructions to let you upgrade your Tormach 1100M CNC mill with servo motors.

Additionally, Tormach provides M+ decals for the electrical cabinet and enclosure of 1100M CNC mill.

Power drawbar

This image has an empty alt attribute; its file name is Power-drawbar-1.jpg
Power drawbar

If your project requires various cutting tools and you’re tired of manually changing them, Tormach’s power drawbar upgrade is a viable option. It helps you save time and effort while also increasing your productivity.

A pneumatic cylinder in the power drawbar unit tightens the drawbar with compressed air to hold the cutting tool in the TTS collet. The operation of the power drawbar is controlled using a push-button system.

Alternatively, you can control the power drawbar using a foot pedal kit that provides hands-free operation for drawbar activation.

This assembly is somewhat floating rather than being entirely fastened. This provision put all the tool holding force on the drawbar rather than on the spindle bearings.

To use the power drawbar, you will need about 90 psi of air pressure.

9. Accessories

Tormach offers various custom-engineered accessories to achieve higher productivity and enhance the capability of your CNC machining.

4th axis and rotary tables

microARC 4th axis kit
microARC 4th axis kit

Tormach offers microARC 4th axis kit that holds the workpiece and provides A-axis rotation to it.

The 4th axis kit lets the cutting tool move along the rotating workpieces to mill designs or slots on the front, back, and sides of the workpiece.