While Glowforge is a good laser printer, there are some great alternatives to consider.
In this article, I’ve compiled a list of Glowforge competitor laser machines that are great alternatives if you don’t want Glowforge.
The machines mentioned here are either cheaper than Glowforge or offer certain advantages compared to Glowforge.
MellowPine is reader-supported. When you buy through links on my site, I may earn an affiliate commission at no extra cost to you.
What’s in this article?
Best Glowforge Alternatives
Here are the best Glowforge alternatives compared with Glowforge.
| Machines | Price | Work Area | Laser Power |
|---|---|---|---|
| Glowforge | $4,000 – $7,000 | 18” x 20” x 2″ | 40W, 45W |
| OMTech 60W CO2 Laser | $3,000 – $3,200 | 20″ x 28″ x 11″ | 60W, 80W |
| FSL Muse Core | $3,000 – $3,500 | 20″ x 12″ x 2.5″ | 40W, 45W |
| Flux Beambox Compact | $4,100 | 15.7″ x 14.7″ x 3.1″ | 40W |
| xTool P2 CO2 Laser | $4,299 – $5,955 | 26.7”x 14.1” x 2.7″ | 55W |
| Nova 24 | $7,400 | 23.6″ x 15.7″ x 6.1″ | 60W |
| Fusion Pro 24 | contact Epilog | 24″ x 24″ x 9″ | 60W or 80W (CO2) 30W or 50W (fiber) |
Table comparing Glowforge with the best alternative laser machines
They all have similar material capabilities as Glowforge, but their processing speed varies depending on the laser power.
A high-powered laser can process the same material faster than a low-powered laser.
1. vs Glowforge
| Parameter | OMTech 60W CO2 Laser | Glowforge |
|---|---|---|
| Price | ~$3,000 – $3,200 | ~$4,000 – $7,000 |
| Laser Power | 60W | 40W or 45W |
| Autofocus | Optional | Available |
| Footprint | 47.24″ x 34.25″ x 36.6″ | 38″ x 20.75″ x 8.25″ |
| Work Area | 20″ x 28″ x 11″ | 18” x 20” x 2″ |
| Printable Area | 20″ x 28″ | 11” x 19.5” |
| Engraving Resolution | 4,500 DPI | 1,355 DPI |
| Passthrough | Yes | only on “Glowforge Pro” |
| Preview Camera | No | Yes |
| Warranty | 2 year | 6 months – 12 months |
A quick comparison of OMTech vs Glowforge
OMTech’s 60W CO2 laser is a hard-to-beat alternative to Glowforge. It comes with a high-powered laser, a large work area, passthrough capability, bundled LightBurn software, an extended warranty, etc.
Comparatively Affordable
OMTech provides the 60W model in two variants, AF2028-60 and MF2028-60.
The AF2028-60 variant comes with an autofocus feature, and it costs around $3,200, whereas the MF2028-60 variant doesn’t include an autofocus feature, and is priced at around $3,000.
In contrast, Glowforge’s basic model costs around $4,000, which is about $1,000 more than OMTech’s 60W laser machine.
Larger Work Area
OMTech 60W laser comes with a 20″ x 28″ work area, while Glowforge has an 18″ x 20″ work area. But the effective work area or actual printable area of Glowforge is much smaller at around 11″ x 19.5″.
With a larger work area, the OMTech 60W laser also has a large footprint of 47.24″ x 34.25″ x 36.6″. It is a cabinet-type machine with an on-the-wheel design.
More Powerful Laser
While OMTech houses a 60W CO2 laser, Glowforge is only available with 40W and 45W CO2 laser options.
You can even replace the 60W CO2 laser tube on OMTech with an 80W laser upgrade.
Higher Engraving Resolution
The maximum engraving resolution possible with Glowforge is 1,355 DPI, whereas the OMTech 60W laser has a maximum resolution capability of 4,500 DPI.
Built-in Passthrough Doors
OMTech has passthrough doors on its front and back. Each door measures around 29″ x 3.75″ (W x H).
The passthrough feature allows you to process materials of large sizes, which otherwise would be impossible to house in its work area.
In the case of Glowforge, the passthrough feature is only available in their Pro model, which costs around ~$7,000.
Furthermore, the passthrough slot in Glowforge Pro measures 20″ x 0.25″ (WxH), which is much lower than what OMTech provides.
Bundled Software
OMTech 60W CO2 laser comes with LightBurn software, which can be used to prepare the design and send those designs to the laser machine.
Glowforge Print is the software used to control Glowforge laser machines. It can also perform basic design operations, but you’ll have to rely on some dedicated CAD software for more advanced designs.
On the other hand, LightBurn provides comparatively advanced design features which eliminate the need of using separate CAD software, thereby enhancing the productivity of the process.
Assembly
The assembly process of the OMTech 60W CO2 laser machine will be more tiresome than Glowforge and can take up to an hour.
OMTech 60W CO2 laser machine is shipped as a semi-assembled kit which can take around an hour to assemble.
While Glowforge is a pre-assembled laser cutter that takes around 30 minutes to setup.
Extended Warranty
OMTech provides a two-year warranty for its 60W CO2 laser machine, but the laser tube and power supplies only have six-month coverage.
Glowforge gives a maximum warranty of one year for its Plus and Pro models. For the Basic model, a six-month warranty is provided.
Where does OMTech lack when compared to Glowforge?
Unlike Glowforge, the OMTech 60W CO2 laser doesn’t come with a preview camera feature. But you can retrofit a camera onto OMTech laser machines, and the camera will link seamlessly with LighBurn.
Also, OMTech doesn’t have a dedicated community forum like Glowforge, they use a private members-only group on Facebook to connect with the community.
No products found.
No products found.
2. FSL Muse Core vs Glowforge
| Parameter | FSL Muse Core | Glowforge |
|---|---|---|
| Price | $3,000 – $3,500 | ~$4,000 – $7,000 |
| Laser Power | 40W or 45W (optional) | 40W or 45W |
| Autofocus | Available | Available |
| Footprint | 32.3″ x 20.3″ x 8.5″ | 38″ x 20.75″ x 8.25″ |
| Work Area | 20″ x 12″ x 2.5″ | 18” x 20” x 2″ |
| Printable Area | 20″ x 12″ | 11” x 19.5” |
| Engraving Resolution | 1,000 DPI | 1,355 DPI |
| Passthrough | No | only on “Glowforge Pro” |
| Preview Camera | Yes | Yes |
| Warranty | 2 years (upgradable to 3 years) | 6 months – 12 months |
A quick comparison of FSL Muse Core and Glowforge
Comparatively Affordable
When I compared Muse Core’s price range at different online retailers, I found it anywhere between $3,000 to $3,500.
However, depending on the optional upgrades you choose, it can even reach ~$10,000.
Small Footprint but Large Engravable Area
FSL Muse Core has a footprint of 32.3″ x 20.3″ x 8.5″, which requires an area of 655.69 in2 (square inches). Compared to Glowforge, Muse Core takes up 132.81 in2 of less space.
Muse has an engravable area of 20″ x 12″. Comparatively, Glowforge only has an engravable area of 11″ x 19.5″, which is 25.5 in2 less than Muse Core.
Similar Laser Powers
FSL Muse Core is a CO2 desktop laser cutter like Glowforge. It is also available in similar power ranges that Glowforge offers, i.e., 40W and 45W.
By default, Full Spectrum Laser (FSL) provides Muse Core with a 40W CO2 laser, but they offer an optional upgrade to a 45W laser while purchasing.
Low Engraving Resolution
The maximum engraving resolution possible with Muse Core is 1,000 DPI, but Glowforge provides a maximum engraving resolution of 1,355 DPI.
Touch Screen
Muse Core has a 7″ touch screen on top, which you can use to control some of the essential parameters for its operation.
Such a feature is not available on Glowforge laser machines, and you need to connect it with a PC, tablet, or smartphone to operate.
Lots of Optional Upgrades
FSL provides many upgrade options to the buyers of Muse Core laser machines.
Glowforge does not provide such extensive upgrade options. They only have an air filter upgrade.
Following is a list of upgrades provided by FSL for their Muse Core laser machine:
| Upgrades | Estimated Price |
|---|---|
| 45W Laser Tube Upgrade | + $250 |
| Extra focus lenses (1.5″, 2.5″, or 5″) (1.5″ + 2.5″) | + $150 or + $250 |
| Hobby Kit (Air Compressor, Water Pump, and Exhaust Fan) Muse Coolbox | + $750 or + $350 |
| Radiator Water Chiller Upgrade | + $600 |
| M-Series Exhaust Fan FSL 100 Fume Extractor FSL 300 Fume Extractor | + $250 or + $1,100 or + $3,000 |
| Hobby Series Air Compressor | + $150 |
| Muse Rotary Riser Combo | + $1,395 |
| Shipping Insurance | + $25 |
| Three years extended warranty | + $1500 |
Upgrade options available for FSL Muse Core
Autofocus and Preview Camera
Muse Core also has autofocus, and preview camera features like in Glowforge. It will help you automatically focus the laser beam and preview the design with the workpiece.
Offline Software
Muse Core uses a browser-based software called RetinaEngrave. It doesn’t require an internet connection to operate.
Unlike RetinaEngrave, Glowforge Print requires active internet access for its operation.
Glowforge Print and Glowforge Premium are two versions of the same software used to interface with Glowforge laser machines.
Glowforge Premium has an additional subscription charge, while Glowforge Print is free to use.
Assembly
Muse Core comes preassembled and will only take 15 minutes to set it up.
Community and Customer Support
Both Glowforge and FSL provide good customer support for their customers. You can contact them by phone or email.
Glowforge provides a one-year warranty on their machines, whereas FSL provides a two-year warranty period.
FSL also provides an option to avail extended warranty for one more year. With it, you can get three years of warranty for Muse Core.
You can also read a detailed comparison of FSL Muse and GLowforge laser cutters here – Muse vs Glowforge.
3. FLUX Beambox Compact vs Glowforge
| Parameter | FLUX Beambox Compact | Glowforge |
|---|---|---|
| Price | ~$4,100 | ~$4,000 – $7,000 |
| Laser Power | 40W | 40W or 45W |
| Wavelength | 10,640 nm | 10,600 nm |
| Autofocus | Available | Available |
| Footprint | 32.6″ x 26.3″ x 8.5″ | 38″ x 20.75″ x 8.25″ |
| Work Area | 15.7″ x 14.7″ x 3.1″ | 18” x 20” x 2″ |
| Printable Area | 15.7″ x 14.7″ | 11” x 19.5” |
| Engraving Resolution | 1,000 DPI | 1,355 DPI |
| Passthrough | No | only on “Glowforge Pro” |
| Preview Camera | Yes | Yes |
| Warranty | 12 months | 6 months – 12 months |
A quick comparison of FLUX Beambox Compact and Glowforge
Comparatively Affordable
Flux Beambox Compact is priced at ~$4,100 and is comparatively $100 cheaper than Glowforge.
Footprint and Printable Area
Glowforge has a footprint of 38″ x 20.75″ while Beambox Compact has a footprint of 32.6″ x 26.3″. Beambox requires 68.88 in2 (square inches) more space than Glowforge.
The comparatively larger footprint of Beambox is complemented by its large workable/printable area.
Beambox has a printable area of 15.7″ x 14.7″, while Glowforge only has an effective printable area of 11″ x 19.5″.
Low Engraving Resolution
The maximum engraving resolution possible with Beambox is 1,000 DPI, but Glowforge provides a maximum engraving resolution of 1,355 DPI.
Similar Laser
Beambox comes with a standard 40W CO2 laser that operates at 10,640 nm.
If you are looking for a more powerful laser option, you can check out “FLEX Beambox Pro,” it has a 50W laser but is priced almost $600 higher than Beambox Compact.
Preview Camera and Autofocus
Both Glowforge and Beambox have preview cameras facing their work area. It will help you visually align the design with the workpiece.
Unfortunately, Beambox lacks the autofocusing feature that Glowforge provides.
Touchscreen
Beambox has a 1024 x 600 px LCD touchscreen on its top panel nearer the enclosure door. Using it, you can fiddle with some of its working parameters.
Such a feature is not available on Glowforge.
Rotary Upgrade
Beambox has an optional rotary upgrade available, and it costs around $400. Glowforge can’t house rotary attachments in its work area as it only has a 2″ Z-depth.
Assembly
Beambox comes preassembled, and to get it ready for the first job, you must connect the exhaust hose and wifi antenna.
You can unpack and assemble it in about 15 minutes.
Community and Customer Support
Both Glowforge and FLUX provide good customer support for their customers.
Unfortunately, you can only contact Flux by raising a support request on their website, but Glowforge can be contacted through phone calls and email.
Flux provides a one-year warranty for their Beambox series of laser machines, and the laser tube has a standalone warranty of three months.
Glowforge provides six to twelve months of overall warranty, depending on the machine.
4. xTool P2 vs Glowforge
| Parameter | xTool P2 | Glowforge |
|---|---|---|
| Price | ~$4,299 – $5,955 | ~$4,000 – $7,000 |
| Laser Power | 55w | 40W or 45W |
| Wavelength | 10,640 nm | 10,600 nm |
| Autofocus | Available | Available |
| Footprint | 39.4″ x 25.1″ x 10.6″ | 38″ x 20.75″ x 8.25″ |
| Work Area | 26.7”x 14.1” x 2.7″ | 18” x 20”x 2″ |
| Engraving Resolution | 1,000 DPI | 1,355 DPI |
| Passthrough | Yes | only on “Glowforge Pro” |
| Preview Camera | Yes | Yes |
| Warranty | 1 Year | 6 months – 12 months |
A quick comparison of Nova 24 and Glowforge
Comparatively Affordable
Although the starting price of xTool P2 might be slightly higher than Glowforge, it is a feature-packed machine that is comparable to the Glowforge Pro, which costs significantly higher than P2.
Therefore, if you are looking for an affordable alternative to the Pro variant of Glowforge, xTool P2 is the way to go.
Larger Footprint and Work Area
With a footprint of around 39.4″ x 25.1″ x 10.6″, P2 is slightly larger than Glowforge, which has a footprint of 38″ x 20.75″ x 8.25″.
However, this slightly larger footprint comes with the advantage of a significantly larger work area.
xTool P2 provides a work area of around 26.7”x 14.1” x 2.7″, which is larger than the 18” x 20”x 2″ work area of Glowforge.
Apart from that, the base of the work area consists of slats that can be removed to increase the Z-height to fit in taller workpieces.
Built-in Passthrough Doors
Although xTool P2 has a slightly smaller work area along the Y-axis, it comes with an inbuilt passthrough door which allows working on workpieces with infinite length.
In the case of Glowforge, the passthrough feature is only available in their Pro model, which costs around ~$7,000.
Apart from that, xTool also provides an add-on accessory of an Automatic Conveyor Feeder, which can be used to automatically feed the workpiece along the passthrough door and produce a large engraving output.
Therefore, if your primary requirement is to engrave lengthy workpieces, such as wooden planks, then xTool P2 is recommended over Glowforge.
More Powerful Laser
xTool P2 comes with a powerful 55W CO2 laser that can perform clean cuts in 20mm thick acrylic in a single pass.
Furthermore, the higher laser powder also provides the ability to engrave the workpiece at a faster speed and better contrast.
Whereas Glowforge comes with a 40W laser in the basic and plus variants and a 45W laser in the Pro variant.
As a result, xTool P2 is the right choice for applications that require a higher laser power output.
Software Support
When it comes to software compatibility, xTool P2 is compatible with the XCS and LightBurn, whereas, Glowforge is compatible with Glowforge Print.
Although Glowforge Print provides a comparatively more refined experience than XCS, the compatibility of P2 with LightBurn makes it a more versatile option.
Generally, for industrial and creative applications, LightBurn provides greater flexibility to modify and set the laser parameters as per your requirement.
Built-in Air-assist
xTool P2 comes with an inbuilt air assist pump.
The air assist blows the molten material out of the kerf and improves the ability of the laser to perform clean cuts.
In contrast, the Glowforge comes with an air-assist fan that merely blows the smoke away to protect the lens from damage.
Low Engraving Resolution
Engraving resolution affects the sharpness of the engraved design. It determines the number of dots engraved per inch.
Generally, the higher the engraving resolution, the better the ability to produce detailed engravings.
xTool P2 provides a comparatively lower engraving resolution of 1000 DPI, whereas the Glowforge supports an engraving resolution of around 1,355 DPI.
Although the engravings produced with a resolution within the 800-1000 DPI range are well-detailed, the higher resolution of Glowforge makes it ideal for extremely intricate engravings.
Warranty and Support
When it comes to warranty, xTool provides a 1-year warranty on their P2 laser cutters, whereas Glowforge provides a 6-month warranty for their customers in the USA and 2 months for their UK customers.
Despite being a Chinese brand, xTool provides excellent customer support even in the USA, and you can reach them via phone or e-mail.
Although xTool is relatively new to the market, it has become widely popular and has a good audience on its community forum and Facebook page, where you can share your experiences and discuss your issues.
However, being an older brand, Glowforge has a comparatively larger audience base on its forum.
For an in-depth look at the performance of the P2, take a look at our review video.
5. Nova 24 vs Glowforge
| Parameter | Nova 24 | Glowforge |
|---|---|---|
| Price | ~$7,400 | ~$4,000 – $7,000 |
| Laser Power | 60w | 40W or 45W |
| Wavelength | 10,600 nm | 10,600 nm |
| Autofocus | Available | Available |
| Footprint | 57.1″ x 31.9″ x 26″ | 38″ x 20.75″ x 8.25″ |
| Work Area | 23.6″ x 15.7″ x 6.1″ | 18” x 20”x 2″ |
| Printable Area | 23.6″ x 15.7″ | 11” x 19.5” |
| Engraving Resolution | 800 DPI | 1,355 DPI |
| Passthrough | Yes | only on “Glowforge Pro” |
| Preview Camera | As optional upgrade | Yes |
| Warranty | 2 Year | 6 months – 12 months |
A quick comparison of Nova 24 and Glowforge
Comparatively Costly
Nova 24 from Thunder laser costs around $7,400 and is costlier than all laser machines from Glowforge.
However, this extra cost provides various features, such as an in-built water chiller, air assist, exhaust fan, a high-power laser, a larger work area, and lifetime support.
Larger Footprint and Work Area
Nova 24 has a footprint of 57.1″ x 31.9″ x 26″ and a work area of 23.6″ x 15.7″ x 6.1″.
Compared to Glowforge, Nova 24 has 156.02 in2 (square inches) more printable area.
More Powerful Laser
Nova 24 comes with a 60W CO2 laser operating at a wavelength of 10,600 nm, Glowforge’s laser also operates at a similar wavelength, but they are only available in 40W or 45W.
Affordable Replacement Cost
Thunder Laser provides 60W replacement tubes for Nova 24 at an affordable price of around $300. They have a lifetime of anywhere between 1,000 to 2,000 hours.
In the case of Glowforge, each laser replacement can cost around $500. Also, they won’t provide replacements after two years of the machine’s operation.
Low-Resolution Engraving
With the default 2″ laser head provided with Nova 24, you can engrave at a resolution of 500 DPI.
Thunder laser also sells a separate high-resolution laser head. Using it, you can achieve a maximum engraving resolution of 800 DPI.
Comparatively, the engraving resolution possible with Nova 24 is much lower than Glowforge.
The Laser machines from Glowforge have a maximum engraving resolution of 1,355 DPI.
Built-in Passthrough Doors
Like in Glowforge Pro, Nova 24 also has passthrough doors. These doors will help you slide through lengthy workpieces for processing.
Warning Light
Nova 23 has an elevated warning light which shows the job status through red/green indications. Such a feature is not available on Glowforge.
Bundled Software
With Nova 24, Thunder Laser provides LighBurn software licenses that you can use on two computers.
If you are about to buy LighBurn separately, it can cost you anywhere between $60 to $120.
Glowforge uses its free web-based Glowforge Print software to control its machines.
Preview Camera
Unlike Glowforge, Nova 24 doesn’t come with a preview camera facing its work area.
Luckily, Thunder Laser provides a LightBurn camera kit as an upgrade which you can retrofit on Nova 24.
Assembly
Nova 24 requires more assembly time than Glowforge as you have to install separate modules like the water chiller, air pump, exhaust hose, etc.
Extended Warranty
Thunder Laser provides a warranty of two years for the Nova 24 laser machine, with a one-year warranty on the laser tube.
With Glowforge, you’ll only get a maximum warranty of twelve months.
A Quick Look at Glowforge Laser Machines
| Parameters | Glowforge Basic | Glowforge Plus | Glowforge Pro |
|---|---|---|---|
| Price | ~4,000 | ~5,000 | ~7,000 |
| Footprint | 38″ x 20.75″ x 8.25″ | 38″ x 20.75″ x 8.25″ | 38″ x 20.75″ x 8.25″ |
| Passthrough | No | No | Yes |
| Material Depth | ≤18″ | ≤18″ | Unlimited |
| Material Width | ≤20″ | ≤20″ | ≤20″ |
| Material Height | ≤2″ (without tray) ≤0.5″ (with tray) | ≤2″ (without tray) ≤0.5″ (with tray) | ≤2″ (without tray) ≤0.5″ (with tray) |
| Laser Power | 40W | 40W | 45W |
| Laser Class | 1 | 1 | 4 |
| Autofocus | Yes | Yes | Yes |
| Air Assist | Yes | Yes | Yes |
| Software | Glowforge Print (free) Glowforge Premium | Glowforge Print (free) Glowforge Premium | Glowforge Print (free) Glowforge Premium |
| Internet | Required | Required | Required |
| Warranty | 6 months | 1 year | 1 year |
A quick comparison of Glowforge Basic, Plus, and Pro models of laser machines
Glowforge has three laser machines under its name. They are Glowforge Basic, Glowforge Plus, and Glowforge Pro.
They all look identical and have similar capabilities. Glowforge Basic and Plus models come with a 40W class 1 CO2 laser source, while the Pro model comes with a 45W class 4 CO2 laser source.
Glowforge can work on materials like wood, fabric, leather, paper, acrylic, Delrin, mylar, rubber, Corian, foods, glass, coated metal, marble, anodized aluminum, and titanium.
The ability to work on various materials enables you to make various Glowforge projects that you can sell.
Glowforge Pro has a passthrough feature that allows you to process large sheets of materials up to 1/4″ thick.
All machines from Glowforge have an in-built air assist system, preview camera, exhaust fan, and red dot guidance.
Glowforge Basic comes with a six-month warranty, but the Plus and Pro versions are provided with a one-year warranty.
Though Glowforge provides many features with their machines, they lack a larger work area, rotary support, higher laser power, tube replacement, offline running capability, etc.
You can find a detailed review of Glowforge Pro here — Glowforge Pro Review [2023]: Worth buying?
Frequently Asked Questions
Why does the Glowforge laser machine need ventilation?
Glowforge laser machine needs ventilation as materials emit different gases while processing them. These gases need to be removed from the work area as they can stain the optics and reduce the laser beam intensity. They can also be harmful when inhaled, so it’s better to get rid of the generated gasses.
Can Glowforge perform 3D engravings?
Yes, Glowforege can perform 3D laser engravings on soft materials like wood. However, its carving ability cannot be compared to that of a CNC router.
How long does a Glowforge laser last?
Glowforge laser can last for about two years, though it depends on the machine’s usage and power utilization. Glowforge hasn’t officially mentioned its laser lifetime, but it is estimated to be between 1200 – 2000 hours.
