About Us



Follow Us

Posts Archive


xTool Screen Printer Review: Laser to Print!

xTool Screen Printer

“Innovation” is a term I often use in my xTool laser machine reviews. xTool has done it again! They have put in the work and made a one-of-a-kind screen printer that simplifies the screen printing process. This article will explore, test, and review the xTool Screen Printer to help you understand how it simplifies the … Read more

Atomstack A24 Pro Review and Tests: Good Choice?

Atomstack A24 Pro

Atomstack is rebuilding their classic A-series machines, and their new second-generation variants have a lot of improvements. This article will test and review one of their new machine, Atomstack A24 Pro, to see how it performs. I’ll also compare it with other similar lasers. Pros Cons Powerful 24W laser Work area expansibility is limited Affordable … Read more

How to Align the Mirrors of a CO2 laser

Aligning the Mirrors of a CO2 laser

Aligning the mirrors of a CO2 laser can often be a frustrating task as it is difficult to perfectly reflect the laser off a series of mirrors and position it on the workpiece. But don’t fret! There is a simple hack that you can use to precisely calibrate the mirror alignment to get accurate results. … Read more

Laser Moves but Does Not Fire: How to Fix

Laser moves but does not fire

Is your machine just tracing the cutting or engraving path without firing the laser? This is a laser issue that often triggers panic in laser users, thinking that there’s something wrong with their laser module. But don’t fret! It does not necessarily have to be as serious as it sounds. I’m Unni, and I’m a … Read more

Laser Not Cutting Perfect Circles: How to Fix

Laser not Cutting perfect circles

Is your laser not cutting perfect circles? I’ve been there too. It is a frustrating experience when your laser suddenly forgets what a perfect circle is. I’m Unni, and I’m a laser engraving expert. In this guide, I will explain the three possible reasons why your laser is not cutting perfect circles and how you … Read more

Laser Cuts at Uneven Depths: How to Fix

Laser cuts at uneven depth

Is your laser cutting unevenly causing projects to come out all messed up? Don’t fret! It is a common issue that most laser users encounter at least once in a while. I’m Unni, and I’m a laser engraving expert. In this guide, I will explain the four possible reasons why your laser is cutting at … Read more

Laser Suddenly Halts While Using: How to Fix

Laser Halts during operation

Were you in the middle of an exciting engraving project, and suddenly, your laser engraver decided to take an unexpected break during the process? Don’t worry! You’re not alone. I’ve been through the same frustration, and over the years, I’ve uncovered three reasons for such unexpected halts: electrical interference, unexpected power surge, and faulty USB … Read more